(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Declaration of Conformity Caterpillar


Declaration of Conformity
`

Table 1
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to 2006/42/EC applies only to those machines originally CE marked by the manufacturer listed and which have not since been modified.    
   

EC DECLARATION OF CONFORMITY OF MACHINERY
   
   

Manufacturer:
AVSpare Inc.
Peoria, IL.
USA    

Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
   
    Standards & Regulations Manager, AVSpare France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France    
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder    
Description:
   
Generic Denomination:     Earth-moving Equipment        


   
Function:     Bucket with Top Clamp            


   
Model/Type:     Bucket with Top Clamp            


   
Serial Number:                


   
Commercial Name:     AVSpare Inc.
   
       
Fulfills all the relevant provisions of the following Directives        

   
                       
    Directives     Notified Body     Document No.        
    2006/42/EC     N/A            
                   
                   
                           

   
       

   
                   
           
Done at:
   
        Signature            
Date:
   
        Name/Position            
                           
Note: The above information was correct as ofNovember 2009, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.    

Information System:

336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install
2010/09/24 A New Main Control Valve is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5051}
MP15, MP20, MP30 and MP40 Multi-Processors Hydraulic Rotator Cycle Time - Check
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Safety Messages
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Remove
349E Excavator Hydraulic System Relief Valve (Main) - Heavy Lift
MP15, MP20, MP30 and MP40 Multi-Processors Speed Control Valve
C13, C15, and C18 Tier 4 Interim Engines Soot Sensor - Test
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Fumes Disposal Filter - Remove and Install - Element and Breather Group
374D Excavator Safety Messages
MP15, MP20, MP30 and MP40 Multi-Processors Speed Control Valve
MP15, MP20, MP30 and MP40 Multi-Processors Hydraulic Rotator Cycle Time - Check
MP15, MP20, MP30 and MP40 Multi-Processors Swivel Leakage - Test
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Work Tool Installation and Removal
MP15, MP20, MP30 and MP40 Multi-Processors Swivel Leakage - Test
The Location of the Brackets on the Air Intake Tube Assembly Has Been Corrected on Certain Excavators{1071}
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Declaration of Conformity
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Declaration of Conformity
(Custom) Hydraulic Buckets for Wheel Loaders, Integrated Toolcarriers, and Track Loaders Operation
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install - For Series Turbocharger Applications
2010/04/15 The Center-Lock Hydraulic Pin Grabber Quick Couplers Have Specific Hydraulic Requirements {6129}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Engine Oil Filter Base - Remove and Install - Remote
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder