Hydraulic Lockout Control
`
325C and 325C L Excavator
[SEBU7441]
OPERATOR STATION
CONTROL GP-HYDRAULIC
320B, 320B L and 320B N Excavators
Joystick Controls
325C and 325C L Excavator
Hydraulic Lockout Control
Show/hide table
| |
| Illustration 1 | g00811229 |
The hydraulic lockout control is located at the left side of the left console.
Show/hide table
|
Locked - Move the travel levers/pedals and move the joysticks to the HOLD (center) position. Move the hydraulic lockout control backward to the LOCKED position. This makes all of the factory installed hydraulic controls inoperable. |
Note: Make sure that the hydraulic lockout control is in the LOCKED position before attempting to start the engine. If the lever is in the UNLOCKED position, the engine start switch will not function.
Show/hide table
| |
| Illustration 2 | g00811329 |
Show/hide table
|
Unlocked - Move the hydraulic lockout control forward to the UNLOCKED position. This makes all of the factory installed hydraulic controls operable. |
Information System:
312C Excavator 3064 Engine Supplement
Air Inlet Heater - Remove and Install
325C and 325C L Excavator
Engine Starting
3046 Engine for Caterpillar Built Machines
Fuel Injection Nozzle - Test
W345B Series II Material Handler Machine System Specifications
Wiring (Battery)
312C Excavator 3064 Engine Supplement
Radiator - Install
325C and 325C L Excavator
Window (Front)
325C and 325C L Excavator
Air Conditioning and Heating Control - If Equipped
320C and 322C Forest Machines Hydraulic System
Travel Hydraulic System
5230B Excavator Hydraulic System
Piston Pump (Hydraulic Cooling) - Test and Adjust
Chart for Heli-Coil Repair {0676}
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators
Parking
2001/07/16
New Electronic Tachometers Have Different Connection To Wiring Harness {7462}
325C Excavator
Engine Starting with Ether Starting Aid - If Equipped
325C and 325C L Excavator
Engine and Machine Warm-Up
320C U Excavator
Securing the Machine
312C Excavator 3064 Engine Supplement
Turbocharger - Install
2002/05/06
New High Temperature Buffer Seals Reduce Oil Leakage From Hydraulic Cylinders {7562}
325C and 325C L Excavator
Engine Oil Level - Check
3064 and 3066 Engines for Caterpillar Built Machines
Fuel Injection Timing - Check
325C and 325C L Excavator
Engine Oil and Filter - Change
325C and 325C L Excavator
Fuel System Filter - Replace
325C Excavator
Fuses - Replace
Starting Motor Solenoid - Replace {1467}
325C and 325C L Excavator
Hydraulic System Oil Filter (Case Drain) - Replace