Capacities (Refill)
`
385B Excavator
[SEBU7440]
MACHINE ARRANGEMENT
Show/hide table
| 385B and 385B L
Approximate Refill Capacities |
||||
| Component or System | Liters | US gal | Imp gal | Recommended Type |
| Cooling System | 101 | 26.7 | 22.2 | AVSpare Extended Life Coolant (ELC) |
| Coolant Reservoir | 4.5 | 1.2 | 1 | AVSpare Extended Life Coolant (ELC) |
| Fuel Tank | 1240 | 327 | 273 | No. 1 Diesel Fuel or No. 2 Diesel Fuel |
| Engine Crankcase with Filter | 65 | 17 | 14 | API CG-4 Diesel Engine Oil (DEO) or API CF-4 Diesel Engine Oil (DEO) |
| Hydraulic System(1) | 566 | 150 | 125 | AVSpare Hydraulic Oil (HYDO) or AVSpare Biodegradable Hydraulic Oil (HEES)(2) |
| Each Swing Drive | 19 | 5 | 4.2 | AVSpare TDTO |
| Each Final Drive | 21 | 5.5 | 4.6 | AVSpare TDTO |
| Swing Gear | 70 | 18.5 | 15.4 | Multipurpose Lithium Grease NLGI Grade 2 |
Show/hide table
| (1) | The amount of hydraulic fluid that is needed to refill the hydraulic system after performing Operation and Maintenance Manual, "Hydraulic System Oil - Change" |
| (2) | Consult your AVSpare dealer before you use biodegradable hydraulic oil. Your machine may not be compatible with biodegradable hydraulic oil. |
Information System:
345B Series II Excavator
Hydraulic System Pressure Gauge (Fine Filtration Filter) - Inspect - If Equipped
345B Series II Excavator
Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
345B Series II Excavator
Fuses - Replace
320C, 322C and 325C Excavators Tool Control System
System 11: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
320C, 322C and 325C Excavators Tool Control System
System 11: Relief Valve (Line) - Test and Adjust - Work Tool
320C, 322C and 325C Excavators Tool Control System
System 11: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
320C, 322C and 325C Excavators Tool Control System
System 11: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320C, 322C and 325C Excavators Tool Control System
System 11: Default Value of Work Tool Parameters
320C, 322C and 325C Excavators Tool Control System
System 2: Relief Valve (Line) - Test and Adjust - Work Tool
5230B Excavator Machine Systems
Swing Drive
320C, 322C and 325C Excavators Tool Control System
System 2: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
320C, 322C and 325C Excavators Tool Control System
System 2: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
312C Excavator Machine Systems
Alternate Pattern Control Valve - Remove
325C and 325C L Excavator
Bucket Linkage (D Family) - Lubricate
C15 Petroleum Generator Set Engines
Electronic Unit Injector Mechanism
5230B Excavator Electronic Systems Guide
Location of Solenoids
320C and 322C Forest Machines Hydraulic System
Return Hydraulic System
446B Backhoe Loader Transmission (Autoshift)
Pressure Taps
5230B Excavator Electronic Systems Guide
Location of Switches
314C Excavator Excavator Systems
Bucket - Remove
2002/04/08
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
5230B Excavator Electronic Systems Guide
Location of Electronic Control Modules
5230B Excavator Electronic Systems Guide
Component Location Overview
446B Backhoe Loader Transmission (Autoshift)
Transmission and Torque Converter - Test