365B and 365B Series II Excavators Lifting Capacities Caterpillar

Lifting Capacities

365B and 365B Series II Excavators [SEBU7519]

365B and 365B Series II Excavators Lifting and Tying Down the Machine

365B and 365B Series II Excavators Lifting Capacities

MACHINE ARRANGEMENT

322B, 322B L, 325B and 325B L Excavators Lubricant Viscosities - Fluids Recommendations

322B, 322B L, 325B and 325B L Excavators Shipping the Machine

320B, 322B and 325B Excavators Material Handler Operation

322B, 322B L, 325B and 325B L Excavators Engine and Machine Warm-Up

365B, 365B Series II and 365BL Excavators Plate Locations and Film Locations

365B Excavator Backup Controls

1.1. Material Handler (Short Configuration)

Show/hide table




Illustration 1	g00586902
(H) Height (F) Lifting capacity over the front or rear of the machine (S) Lifting capacity over the side of the machine (R) Reach

Material Handler (Short Configuration)

Show/hide table

Table 1
	365B Excavator with a 10.5 m long reach boom, a 7.3 m long stick, no work tool and 750 mm double grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
	(R)
	3.0 m		4.5 m		6.0 m		7.5 m		9.0 m

	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)
13.5 m
12.0 m
10.5 m
9.0 m
7.5 m
6.0 m
4.5 m									11940 ⁽²⁾
3.0 m			9770 ⁽²⁾		19930 ⁽²⁾		15530 ⁽²⁾		12820 ⁽²⁾
1.5 m			7340 ⁽²⁾		19530 ⁽²⁾		16640 ⁽²⁾		13600 ⁽²⁾
0.0 m	3690 ⁽²⁾		8040 ⁽²⁾		16100 ⁽²⁾		17390 ⁽²⁾		14180 ⁽²⁾
-1.5 m	6290 ⁽²⁾		9630 ⁽²⁾		15840 ⁽²⁾		17750 ⁽²⁾		14510 ⁽²⁾
-3.0 m	8560 ⁽²⁾		11430 ⁽²⁾		16730 ⁽²⁾		17690 ⁽²⁾		14560 ⁽²⁾
-4.5 m			13240 ⁽²⁾		18140 ⁽²⁾		17200 ⁽²⁾		14270 ⁽²⁾
-6 m			15000 ⁽²⁾		19760 ⁽²⁾		16240 ⁽²⁾		13590 ⁽²⁾
-7.5 m							14700 ⁽²⁾		12390 ⁽²⁾
	365B Excavator with a 10.5 m long reach boom, a 7.3 m long stick, no work tool and 750 mm double grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
	(R)
	10.5m		12.0m		13.5m		15.0m		16.5m
	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)
13.5 m
12.0 m					7620 ⁽²⁾
10.5 m					7600 ⁽²⁾
9.0 m					7700 ⁽²⁾		7350 ⁽²⁾
7.5 m			8480 ⁽²⁾		7890 ⁽²⁾		7440 ⁽²⁾
6.0 m			8860 ⁽²⁾		8140 ⁽²⁾		7590 ⁽²⁾
4.5 m	10390 ⁽²⁾		9270 ⁽²⁾		8430 ⁽²⁾		7770 ⁽²⁾		7250 ⁽²⁾
3.0 m	11000 ⁽²⁾		9700 ⁽²⁾		8720 ⁽²⁾		7960 ⁽²⁾		7340 ⁽²⁾
1.5 m	11550 ⁽²⁾		10080 ⁽²⁾		8980 ⁽²⁾		8120 ⁽²⁾		7400 ⁽²⁾
0.0 m	11980 ⁽²⁾		10390 ⁽²⁾		9190 ⁽²⁾		8230 ⁽²⁾
-1.5 m	12240 ⁽²⁾		10570 ⁽²⁾		9290 ⁽²⁾		8230 ⁽²⁾
-3.0 m	12300 ⁽²⁾		10590 ⁽²⁾		9240 ⁽²⁾		8080 ⁽²⁾
-4.5 m	12080 ⁽²⁾		10380 ⁽²⁾		8960 ⁽²⁾		7930 ⁽²⁾
-6 m	11530 ⁽²⁾		9840 ⁽²⁾		8320 ⁽²⁾
-7.5 m	10480 ⁽²⁾		8780 ⁽²⁾

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all work tools must be subtracted from the lifting capacities.

Show/hide table

Table 2
	365B Excavator with a 10.5 m long reach boom, a 7.3 m long stick, no work tool and 750 mm double grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
	R
	Maximum
	(F)	(S)	m
13.5 m
12.0 m	7560 ⁽²⁾		14.01
10.5 m	7370 ⁽²⁾		14.88
9.0 m	7250 ⁽²⁾		15.55
7.5 m	7200 ⁽²⁾		16.06
6.0 m	7190 ⁽²⁾		16.42
4.5 m	7210 ⁽²⁾		16.63
3.0 m	7260 ⁽²⁾		16.71
1.5 m	7330 ⁽²⁾		16.65
0.0 m	7410 ⁽²⁾		16.45
-1.5 m	7500 ⁽²⁾		16.12
-3.0 m	7590 ⁽²⁾		15.63
-4.5 m	7650 ⁽²⁾		14.98
-6.0 m	7530 ⁽²⁾		13.08
-7.5 m

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all work tools must be subtracted from the lifting capacities.