| |
| Illustration 1 | g00806137 |
The grapple/magnet switch is located on the right console.
|
|
Grapple ON - Push the left side of the switch in order to turn off the generator. When the generator is deactivated, the grapple can be used. |
|
|
Magnet ON - Push the right side of the switch in order to turn on the generator. When the generator is activated, the magnet can be used. |
Before operating the magnet, make sure that the grapple/magnet switch is in the MAGNET position.
| |
| Illustration 2 | g00559405 |
The machine control pattern is initially set at the factory to the SAE system, as shown. The pattern on the left pertains to the left joystick, and the pattern on the right pertains to the right joystick. The patterns can be changed to different configurations. If you want to change the settings, consult your AVSpare dealer.
| |
| Illustration 3 | g00570709 |
Press numeric key “8” on the keypad in order to display the current machine control pattern.
The machine control pattern is also displayed when the monitor is turned on.
|
Stick Out (1) - Move the joystick to this position in order to move the stick outward. |
|
SWING RIGHT (2) - Move the joystick to this position in order to swing the upper structure to the right. |
|
STICK IN (3) - Move the joystick to this position in order to move the stick inward. |
|
SWING LEFT (4) - Move the joystick to this position in order to swing the upper structure to the left. |
|
BOOM LOWER (5) - Move the joystick to this position in order to lower the boom. |
|
BOOM RAISE (7) - Move the joystick to this position in order to raise the boom. |
HOLD (9) - When you release the joysticks from any position, the joysticks will return to the HOLD position. Movement of the upper structure will stop.
Two functions may be performed at the same time by moving a joystick diagonally.
| |
| Illustration 4 | g00274485 |
|
|
Magnet DROP (10) - Press the switch on the front of the left joystick in order to turn off the magnet. When you turn off the magnet, the load will drop. |
|
Horn (11) - Press the lower switch on the top of the left joystick in order to activate the horn. |
| |
| Illustration 5 | g00470027 |
|
|
Magnet LIFT (12) - Press the switch on the front of the right joystick in order to turn on the magnet. When you turn on the magnet, the magnet will lift the load. |