Specifications
`
345B Series II Excavator
[SEBU7609]
MACHINE ARRANGEMENT
322B, 322B L, 325B and 325B L Excavators
Lubricant Viscosities - Fluids Recommendations
322B, 322B L, 325B and 325B L Excavators
Operating Technique Information
322B, 322B L, 325B and 325B L Excavators
Operation Information
322B, 322B L, 325B and 325B L Excavators
Engine Starting
322B, 322B L, 325B and 325B L Excavators
Shipping the Machine
1.1. Material Handling Configuration
Material Handling Configuration
Show/hide table
 | |
| Illustration 1 | g00680350 |
Show/hide table
| 345B L Material Handler (1) | |
| Approximate Weight | 47140 kg (103925.8 lb) |
| Overall Length (A) | 13.91 m (45 ft 7 inch) |
| Shipping Height (B) | 3.86 m (12 ft 7 inch) |
| Track Shoe Width (C) | 600 mm (2 ft) |
| Overall Width (D) | 3.82 m (12 ft 6 inch) |
Show/hide table
| ( 1 ) | These specifications are for a machine with a 1200 mm (47.2 inch) cab riser and without the following items: stick, stick cylinders and EUROPEAN cab. |
Show/hide table
| Dimensions of Stick (1) | |
|---|---|
| Approximate Weight | 2490 kg (5489.5 lb) |
| Length | 7.9 m (26 ft) |
| Height | 3.86 m (12 ft 7 inch) |
| Width | 650 mm (2 ft 1 inch) |
Show/hide table
| ( 1 ) | The hydraulic lines are installed and the grease lines are installed. |
Show/hide table
| Dimension for Stick Cylinder (1) | |
|---|---|
| Approximate Weight (2) | 421 kg (928.2 lb) |
Show/hide table
| ( 1 ) | One stick cylinder |
| ( 2 ) | This specification is with the hydraulic line on the cylinder. |
Information System:
345B Series II Excavator
Specifications
315C Excavator Machine Systems
Gear Pump (Pilot) - Remove and Install
345B Series II Excavator
Specifications
315C Excavator Machine Systems
Accumulator (Hydraulic Pilot) - Remove and Install
5130B Excavator
Ether Starting Aid Cylinder - Replace
345B Series II Excavator
Specifications
345B Series II Excavator
Specifications
2002/07/01
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
Operating Instructions for the 320C with Material Handler{7000}
311C and 314C Excavators Electric and Electronic
Governor Actuator - Check
5130B Excavator
Engine Oil and Filter - Change
320C and 322C Forest Machines Hydraulic System
Main Hydraulic System
315C Excavator Machine Systems
Hydraulic Tank and Filter - Remove
315C Excavator Machine Systems
Main Hydraulic Pump - Install
315C Excavator Machine Systems
Main Control Valve - Remove
320C and 322C Forest Machines Hydraulic System
Main Control Valve
315C Excavator Machine Systems
Auxiliary Pilot Valve (Straight Travel) - Remove
315C Excavator Machine Systems
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) - Remove
315C Excavator Machine Systems
Main Control Valve - Assemble
315C Excavator Machine Systems
Auxiliary Pilot Valve (Straight Travel) - Disassemble
320C and 322C Forest Machines Hydraulic System
Negative Flow Control System
5130B Excavator
Fuel System Primary Filter - Clean/Replace
320C and 322C Forest Machines Hydraulic System
Heel Hydraulic System
330C Forest Machine Hydraulic System
Cylinder (Boom, Stick and Heel)