345B Series II Excavator Specifications Caterpillar


Specifications
`
1.1. Super Long Demolition Configuration

Super Long Demolition Configuration



Illustration 1g00475611

Table 1
345B L HD Excavator(1) 
Shipping Height (A)  3.44 m (11 ft 3 inch) 
Shipping Length (B)  16.23 m (53 ft 3 inch) 
Tail Swing Radius (C)  3.65 m (12 ft) 
Cab Height(2) (D)  3.61 m (11 ft 10 inch) 
Cab Height(2)(3) (D)  3.91 m (12 ft 10 inch) 
Length to Center of Rollers (E)  4.34 m (14 ft 3 inch) 
Length of Track (F)  5.37 m (17 ft 7 inch) 
The distance between the middle of the two tracks when the frame is retracted.(4) (G)  2.40 m (7 ft 10 inch) 
The distance between the middle of the two tracks when the frame is extended.(4) (G)  3.00 m (9 ft 10 inch) 
Ground Clearance  705 mm (2 ft 4 inch) 
Overall Width with Tracks in Shipping Position(5) (H)  2.99 m (9 ft 10 inch) 
Overall Width with Tracks in the Fully Retracted Position(5) (H)  3.00 m (9 ft 10 inch) 
Operating Weight of 345B L HD(6)  52640 kg (116051.2 lb) 
Operating Weight of 345B L HD(7)  53140 kg (117153.5 lb) 
Operating Weight of 345B L HD(8)  59000 kg (130072.6 lb) 
Operating Weight of 345B L HD(9)  59500 kg (131174.9 lb) 
(1) These specifications are for a machine with the following items: Super long demolition configuration, demolition linkage, 600 mm (2 ft) triple grouser track shoes, 11000 kg (24250.8 lb) counterweight, and no tool
(2) Tilt cab
(3) Including the FOGS
(4) Hydraulic variable undercarriage gauge
(5) These specifications are for a machine with 600 mm (2 ft) track shoes.
(6) These specifications include the following items: standard undercarriage, operator and full fuel tank
(7) These specifications include the following items: standard undercarriage, tilt cab, operator and full fuel tank
(8) These specifications include the following items: hydraulic variable undercarriage, operator and full fuel tank
(9) These specifications include the following items: hydraulic variable undercarriage, tilt cab, operator and full fuel tank

Information System:

2002/07/01 New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
Operating Instructions for the 320C with Material Handler{7000}
311C and 314C Excavators Electric and Electronic Governor Actuator - Check
5130B Excavator Engine Oil and Filter - Change
320C and 322C Forest Machines Hydraulic System Main Hydraulic System
320C and 322C Forest Machines Hydraulic System Main Hydraulic System
320C and 322C Forest Machines Hydraulic System Pilot Hydraulic System
5130B Excavator Engine Oil Level - Check
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Radiator Core - Clean
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Oil - Change
5130B Excavator Engine Air Precleaner - Clean
312C Excavator Machine Systems Pilot Valve (Oil Manifold) - Assemble - NFC Limit Valve
345B Series II Excavator Specifications
5130B Excavator Ether Starting Aid Cylinder - Replace
315C Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
345B Series II Excavator Specifications
315C Excavator Machine Systems Gear Pump (Pilot) - Remove and Install
345B Series II Excavator Specifications
345B Series II Excavator Specifications
315C Excavator Machine Systems Hydraulic Tank and Filter - Remove
315C Excavator Machine Systems Main Hydraulic Pump - Install
315C Excavator Machine Systems Main Control Valve - Remove
320C and 322C Forest Machines Hydraulic System Main Control Valve
315C Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Remove