Engine Air Precleaner - Clean
`
5130B Excavator
[SEBU7071]
5130B Excavator
Engine Air Filter Secondary Element - Replace
5130B Excavator
Engine Oil Level - Check
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
5130B Excavator
Engine Air Filter Primary Element - Clean/Replace
5130B Excavator
Engine Air Filter Secondary Element - Replace
5130B Excavator
Engine Air Precleaner - Clean
5130B Excavator
Engine Air Filter Service Indicator - Inspect
Show/hide table
| NOTICE |
|---|
Service the air cleaner only with the engine stopped. Engine damage could result if the air cleaner is serviced while the engine is running. |
Show/hide table
 | |
| Illustration 1 | g00656205 |
The engine air precleaners are located on the right side of the upper deck. Refer to the following procedure to clean the engine air precleaners.
- Loosen the latch and remove the precleaner cover (1) .
Show/hide table
 | |
| Illustration 2 | g00656202 |
- Clean the cover.
- Remove the precleaner screen and clean the screen. The screen can be cleaned with pressure air, pressure water, or a detergent. When pressure water is used, the maximum pressure should not exceed 280 kPa (40 psi).
Refer to Operation and Maintenance Manual, "General Hazard Information" before you use pressure air to clean the precleaner.
Note: Do not clean the precleaner screen by bumping or tapping the precleaner.
- Inspect the precleaner tube for dirt and for dust. Clean the precleaner tube with pressure air if the tube is dirty.
- Install the clean precleaner screen.
- Install the cover (1) and fasten the latch.
- Repeat Step 1 through Step 6 for the other engine air precleaners.
Information System:
312C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Assemble - NFC Limit Valve
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1524 - FMI 06
5130B Excavator
Engine Air Filter Secondary Element - Replace
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1524 - FMI 05
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications
Boom
312C Excavator Machine Systems
Pilot Valve (Oil Manifold) - Disassemble - NFC Limit Valve
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 05
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems
Control Valve (Shift) - Assemble
5130B Excavator
Engine Air Filter Primary Element - Clean/Replace
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 03
322C Forest Machine Machine System Specifications
Boom - Log Loader
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems
Control Valve (Shift) - Disassemble
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Hydraulic System Oil - Change
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Radiator Core - Clean
5130B Excavator
Engine Oil Level - Check
320C and 322C Forest Machines Hydraulic System
Pilot Hydraulic System
320C and 322C Forest Machines Hydraulic System
Main Hydraulic System
320C and 322C Forest Machines Hydraulic System
Main Hydraulic System
5130B Excavator
Engine Oil and Filter - Change
311C and 314C Excavators Electric and Electronic
Governor Actuator - Check
Operating Instructions for the 320C with Material Handler{7000}
2002/07/01
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
345B Series II Excavator
Specifications
345B Series II Excavator
Specifications