BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Declaration of Conformity Caterpillar

Declaration of Conformity

BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders [M0066672]

BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Safety Messages

BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Shipping

BASIC ENGINE

BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Declaration of Conformity

Show/hide table

Table 1
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to 2006/42/EC applies only to those machines originally CE marked by the manufacturer listed and which have not since been modified.


EC DECLARATION OF CONFORMITY OF MACHINERY

Manufacturer: Sanford BCP 5000 Womack Road Sanford, NC 27330-9594
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
			Standards & Regulations Manager,AVSpare France S.A.S 40, Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder
Description:		Generic Denomination:	Work Tool
		Function:	Skid Steer Loader Backhoe and Multi Terrain Loader Backhoe
		Model/Type:	BH150 and BH160
		Serial Number:
		Commercial Name:	AVSpare Inc.
Fulfills all the relevant provisions of the following Directives

	Directives		Notified Body	Document No.
	98/37/EC		N/A(2)
	89.336/EEC		N/A(2)

Note (1)


Done at:				Signature
Date:				Name/Position

Note: The above information was correct as of November 2015, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.