323F SA and 323F LN Excavator Plate Locations and Film Locations Caterpillar

The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.

AVSpare products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers.

For quick reference, record the identification numbers in the spaces that are provided below the illustration.

Product Identification Number (PIN) and CE Plate

Illustration 1	g00675011

The PIN plate is positioned on the front of the machine, close to the operator compartment.

Illustration 2	g02436556

Model number (A)____________________

Machine PIN (B)____________________

Service Information Plate (C)____________________

Year of Manufacture (If Required) (D)____________________

CE Plate (If Required) (E)

Country of Origin Info Plate (If Required) (F)

Local regulation may require documentation of the Year of Manufacture in the OMM. Comply with these regulations.

CE Plate

Note: The CE plate is on machines that are going into the European Union.

Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.

If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. Several pieces of information are stamped onto the "CE" plate.

Illustration 3	g01883459

For machines that are compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided.

• Primary Engine Power (kW)____________________

• Additional Engine Power (kW)____________________

• Typical Machine Weight (kg)____________________

• Year of Construction____________________

• Machine Type____________________

For the name, the address and the country of origin for the manufacturer, see the PIN plate.

Electromagnetic Emissions

Note: This label is on machines that are going into Canada.

Illustration 4	g06063443

If equipped, this label is located next to the Pin plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.

Engine Serial Number

This label is located on the engine.

Engine Serial Number ____________________

Sound Certification Film

If equipped, this label is located on the cab door.

Illustration 5	g01082931

If equipped, the certification label is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level L_WA at the time of manufacture for the conditions that are specified in "2000/14/EC".